| 1. | Remove the rod seal from the master cylinder. |
| 2. | Disconnect the reservoir tank hose (A).
|
| 3. | Remove the snap ring (A) while pushing in the secondary piston (B).
|
| 4. | Remove the reservoir union (A) and the reservoir grommets (B) from the master cylinder. NOTE: When reservoir union and master cylinder body are separated, replace the reservoir grommets with new ones.
|
| 5. | Remove the stop pin (C) while pushing in the secondary piston (D). |
| 6. | Remove the secondary piston (A), primary piston (B) and piston guide (C).
|
| 7. | Remove the reservoir seal (A) from the reservoir cap (B).
|
| 8. | Remove the strainer (C) from the reservoir (D). |