| 1. | Remove the steering gearbox. |
| 2. | Position the 34 mm socket wrench (A) on the flange part of the gearbox housing with a washer (B), 10 x 105 mm flange bolt (C) and the 10 mm nut (D) as shown.
|
| 3. | Hold the nut with a wrench, and tighten the flange bolt with another wrench. Remove the gearbox mount cushion (E). |
| 4. | Apply a mild soap and water solution to the new gearbox mount cushion surface (A), then place it on the gearbox mounting cushion hole.
|
| 5. | Position the 34 mm socket wrench on the flange part of the gearbox housing with a washer, flange bolt, and the nut as shown. |
| 6. | Install the gearbox mount cushion by tightening the nut until the mount cushion edges (B) properly fit on the gearbox flange surface. |