| 1. | Lightly rub the area around the broken section (A) with fine steel wool, then clean it with alcohol.
|
| 2. | Carefully mask above and below the broken portion of the window antenna wire (B) with cellophane tape (C). |
| 3. | Mix the silver conductive paint thoroughly. Using a small brush, apply a heavy coat of paint (A) extending about 1/8'' on both sides of the break. Allow 30 minutes to dry.
|
| 4. | Check for continuity in the repaired wire. |
| 5. | Apply a second coat of paint in the same way. Let it dry 3 hours before removing the tape. |