Emblem/Sticker Replacement

1.	To remove the front ‘‘H'' emblem the front grille.

2.	Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

3.

Apply the emblem/sticker where shown: When installing the rear i-VTEC sticker on the rear window, align the lower edge of the application tape and bottom of the sticker with the rear window edge, then press the sticker into place, and remove the application tape. When installing the side i-VTEC sticker on the rear door, align the lower edge of the application tape with the edge of the door molding, and align notches in the application tape with the edge of the rear door, then press the sticker into place, and remove the application tape.

4.	After installing the front ‘‘H'' emblem, reinstall the front grille.