Interior Trim Removal/Installation - Trunk Area - With Trunk Floor Spacer

With Trunk Floor Spacer


1.With fixed type rear seat: Remove the seat-back.

2.With fold down type rear seat: Fold the rear seat-back forward.

3.Replace the fasteners (A), then remove the spare tyre lid (B).


4.Remove the trunk lid weatherstrip near the trunk rear trim panel.

5.Detach the clips, and release the hooks (A) by pulling the trunk rear trim panel (B) up, then remove it.


6.Remove the clips, then remove the left trunk floor spacer (A) and right trunk floor spacer (B).


7.Remove the clips (A, B), then remove the trunk side trim panel (C). Release the wire harness (E) from the slit (F) in the trim panel.


8.If necessary, remove the trunk tool box (A).


9.Install the trim in the reverse order of removal, and note these items:

  • Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
  • Push the clips into place securely.