Resetting the Sunroof Control Unit

• The sunroof was moved manually while the battery was dead or disconnected.
  
• The sunroof motor was replaced with a new one.
  
• Any of components related to the sunroof were replaced.
  
  • Wind deflector
    
  • Sunroof glass
    
  • Sunroof seal
    
  • Sunroof glass bracket
    
  • Sunroof cables, etc.
    

1.	Turn the ignition switch OFF.

2.	Press and hold the tilt switch, and turn the ignition switch ON (II).

3.	Release the tilt switch, and turn the ignition switch OFF.

4.	Repeat steps 2 and 3 four times.

5.	Press and hold the sunroof open switch for 3 additional seconds after the sunroof is fully opened.

6.	Press and hold the sunroof close switch for 3 additional seconds after the sunroof is fully closed (tilted).

7.	Confirm that the sunroof control unit is reset by using the moonroof AUTO OPEN and AUTO CLOSE function.