|1.||Close the glass fully.|
|2.||Slide the sunshade all the way back.|
|3.||Pry out the lid (A), remove the screws (B), and release the hooks (C), then remove both bracket covers (D). With a T25 Torx bit, remove the bolts (E) from both glass brackets (F).|
|4.||Remove the glass (A) by lifting it up. Do not damage the roof panel.|
|5.||Install the glass in the reverse order of the removal, and adjust the glass height alignment.|
|6.||Reset the sunroof control unit.|
|7.||Check for water leaks. Use free-flowing water from a hose without a nozzle. Do not use high-pressure water.|
NOTE: It is normal for some water to seep past the sunroof into the sunroof frame, and exit through the drains.