Sunroof Glass Height Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0+1/-1 mm (0+0.04/-0.04 in.) all the way around, and the length between the roof panel and glass should be within 13.5+1/-1 mm (0.55+0.04/-0.04 in.). If not, make the following adjustment:

1.	Remove the bracket cover.

2.	Adjust the glass (A). -1  Using a T25 Torx bit, slightly loosen the bolts. -2  Move the glass up or down and forward or rearward. -3  Tighten all bolts securely.

3.	If necessary, repeat on the opposite side.