Rear Seat Cushion Cover Replacement

• Take care not to tear the seams or damage the seat covers.
  
• Put on gloves to protect your hands.
  

1.	Remove the seat cushion: Fold down/split fold down Fixed

2.	From the back of the seat-back, pass both lower retainers (A) through the slots in the seat cushion pad, and release all the clips (B), and fold back the seat cushion cover.

3.	Pull back the edge of the seat cushion cover all the way around, and release the clips (A), from the seat cushion cover (B) through the hole in the seat cushion pad, then remove the seat cushion cover.

4.

Install the cover in the reverse order of removal, and note these items: To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the retainers and clips. Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).