Rear Seat-back Release Lever/Cable Removal/Installation

Fold Down/Split Fold Down


NOTE: Take care not to bend or scratch the interior trim.

1.Open the trunk lid.

2.From the trunk compartment, detach the cable clip.

 

3.Disconnect the seat-back release cable (A) from the seat-back latch (B).

 

4.Push the tab (A) to release the hook (B), and rotate the seat-back release lever (C) clockwise to release the hook (D).

 

5.Install the release lever/cable in the reverse order of removal, and note these items:

  • Make sure the release cable is connected securely.
  • Make sure the seat-back locks securely and unlocks properly.