| 1. | Turn the ignition switch OFF. |
| 2. | Remove the ignition key from the ignition switch. |
| 3. | Close and lock the doors. |
| 4. | Try to unlock the doors with the keyless transmitter. Do the door lock actuators work normally? YES - The system is OK at this time.n NO - Go to 5. |
| 5. | Connect the HDS to the data link connector. |
| 6. | Turn the ignition switch ON (II). |
| 7. | Enter the BODY ELECTRICAL, then select the KEYLESS. |
| 8. | Do the KEYLESS CHECK. Is the KEYLESS ENTRY TRANSMITTER CODE RECEIVED indicated? YES - Recheck the system again. If the UNLOCK/LOCK operation only does not work, replace the under-dash fuse/relay box assembly.n NO - Recheck the system again. If the UNLOCK/LOCK operation only does not work, and HDS communicates correctly, replace the immobilizer-keyless control unit.n |