Door Key Cylinder Switch Test

1.Remove the driver's door panel.

2.Disconnect the 10P connector (A) from the key cylinder switch (B).

 

3.Check for continuity between the terminals.

  • There should be continuity between the No. 9 [No. 6] and No. 5 [No. 10] terminals when the door key cylinder switch is in LOCK position. (With security)
  • There should be no continuity between the No. 9 [No. 6] and No. 5 [No. 10] terminals when the door key cylinder switch is in the neutral or UNLOCK position. (With security)
  • There should be continuity between the No. 8 [No. 7] and No. 5 [No. 10] terminals when the door key cylinder switch is in UNLOCK position.
  • There should be no continuity between the No. 8 [No. 7] and No. 5 [No. 10] terminals when the door key cylinder switch is in the neutral or LOCK position.
[ ]: RHD type

4.If the continuity is not as specified, replace the door key cylinder assembly.