Ignition Switch Replacement

SRS components are located in this area. Review the SRS component locations, and precautions and procedures before performing repairs or servicing.

1.Make sure you have the anti-theft code for the audio, then write down the audio presets. Make sure the ignition switch is OFF.

2.Disconnect the negative battery cable.

3.Remove the driver's dashboard lower cover, and the steering column covers.

4.Disconnect the 7P connector (A) from the ignition switch (B).


5.Remove the two screws and the ignition switch.

6.Install in the reverse order of removal.

7.After reconnecting the battery, enter the anti-theft code for the audio, then enter the customer's audio presets and reset the clock.