| DTC 11-01: | Low/High Voltage for IG1 (Initial diagnosis) |
| 1. | Clear the DTC using the HDS. |
| 2. | Turn the ignition switch OFF. |
| 3. | Start the engine. |
| 4. | Wait at least 60 seconds. Does the EPS indicator come on? YES - Go to 5. NO - Check for loose wires or poor connections. If the connections are good, the system is OK at this time.n |
| 5. | Verify the DTC. Is DTC 11-01 indicated? YES - Check for a poor connection at the battery terminal or battery. If they are good, go to the Alternator and Regulator Circuit Troubleshooting: R18A1 engine model, K20Z2 engine model.n NO - Perform the appropriate troubleshooting for the code indicated.n |