| DTC 32-07: | EPS Control Unit Internal Circuit (Current Sensor) (Diagnosis when steering wheel turning) |
| 1. | Clear the DTC using the HDS. |
| 2. | Turn the ignition switch OFF. |
| 3. | Start the engine. |
| 4. | Turn the steering wheel to right or left, and wait 10 seconds or more. Does the EPS indicator come on? YES - Go to 5. NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.n |
| 5. | Verify the DTC. Is DTC 32-07 indicated? YES - Check for loose terminals in the EPS control unit connector, and repair if necessary. If no poor connections are found, replace the EPS control unit.n NO - Perform the appropriate troubleshooting for the code indicated.n |