| DTC 34-01: | Power Relay Stuck ON (When Ignition switch is OFF) |
| 1. | Clear the DTC using the HDS. |
| 2. | Turn the ignition switch OFF. |
| 3. | Turn the ignition switch ON (II). Does the EPS indicator come on? YES - Go to 4. NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.n |
| 4. | Verify the DTC. Is DTC 34-01 indicated? YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit.n NO - Perform the appropriate troubleshooting for the code indicated.n |