| DTC 35-03: | EPS Control Unit Internal Circuit (EPS CPU) (Internal diagnosis/regular diagnosis) |
| 1. | Clear the DTC using the HDS. |
| 2. | Turn the ignition switch OFF. |
| 3. | Turn the ignition switch ON (II). Does the EPS indicator come on? YES - Go to 4. NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.n |
| 4. | Start the engine, and wait 10 seconds or more. |
| 5. | Verify the DTC. Is DTC 35-03 or DTC 35-05 indicated? YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit.n NO - Perform the appropriate troubleshooting for the code indicated.n |