| DTC B1152: | Gauge Control Module (EEPROM) Error |
| 1. | Clear the DTCs with the HDS. |
| 2. | Turn the ignition switch OFF, and then back ON (II). |
| 3. | Wait for 6 seconds or more. |
| 4. | Check for DTCs with the HDS. Is DTC B1152 indicated? YES - Replace the gauge control module (tach).n NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition and the charging system.n |