Clutch Hose Replacement

• Replace the clutch hose if the hose is twisted, cracked, or if it leaks.
  
• Use fender covers to avoid damaging painted surfaces.
  
• Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately water.
  

1.	Disconnect the clutch hose (A) from the clutch line (B).

2.	Remove and discard the clutch hose clips (A) from the clutch hose (B).

3.	Remove the clutch hose from the body (C) and clutch hose bracket (D).

4.	Install the clutch hose (A) on the body (B) and clutch hose bracket (C) with the new clutch hose clips (D).

5.	Connect the clutch line (A) to the clutch hose (B).

6.	Bleed the clutch hydraulic system.

7.	Do the following checks: Check the clutch hose and line joint for leaks, and tighten if necessary. Check the clutch hose for interference and twisting.