| 1. | Disconnect the clutch pedal position switch connector (A).
|
| 2. | Pry out the lock pin (B), and pull the pedal pin (C) out of the yoke. |
| 3. | Remove the master cylinder mounting nuts (D) and clutch pedal mounting bolt (E). |
| 4. | Remove the clutch pedal (F). |
| 5. | Install the clutch pedal (A).
|
| 6. | Install the clutch pedal mounting bolt (B) and master cylinder mounting nuts (C). |
| 7. | Apply grease to the pedal pin (D), then install it and new lock pin (E) to the yoke. |
| 8. | Connect the clutch pedal position switch connector (F). |
| 9. | Adjust the clutch pedal and clutch pedal position switch. |