| 1. | Drain the engine coolant. |
| 2. | Remove the drive belt auto-tensioner. |
| 3. | Remove the water pump (A) by removing the five bolts.
|
| 4. | Inspect, and clean the O-ring groove and the mating surface of the engine block. |
| 5. | Install the water pump with a new O-ring (B) in the reverse order of removal. |
| 6. | Clean up any spilled engine coolant. |
| 7. | Install the drive belt auto-tensioner. |
| 8. | Refill the radiator with engine coolant, then bleed the air from the cooling system. |