| 3. | Check the cylinder head for warpage. Measure along the edges, and three ways across the center.
- If warpage is less than 0.08 mm (0.003 in.) cylinder head resurfacing is not required.
- If warpage is between 0.08 mm (0.003 in.) and 0.2 mm (0.008 in.), resurface the cylinder head.
- Maximum resurface limit is 0.2 mm (0.008 in.) based on a height of 115 mm (4.53 in.).
| Cylinder Head Height | | Standard (New): | 114.95-115.05 mm
(4.526-4.530 in.) |
|