| 1. | Remove the harness cover.
|
| 2. | Remove the injector cover.
|
| 3. | Disconnect the four ignition coil connectors. Remove the four bolts (A) securing the harness holders, then remove the front harness holder (B) from the bracket.
|
| 4. | Disconnect the alternator connector (A) and BLK wire (B) from the alternator.
|
| 5. | Disconnect the A/C compressor clutch connector (C), and remove the harness clamp (D). |
| 6. | Remove the dipstick (A) and breather hose (B).
|
| 7. | Remove the cylinder head cover.
|