Jazz/Fit   Civic    Privacy Policy

Honda Civic 2006

Cylinder Head Rocker Arm Assembly Installation

1.	If the rocker arm assembly is disassembled, reassemble the rocker arm assembly.

2.	Install the oil control orifice (A) with a new O-ring (B), then install the rocker arm assembly (C).   EDCAB

3.	Install the lost motion assembles (D) and the lost motion holder (E).

4.	Tighten each bolts two turns at a time in sequence. Specified Torque  6 x 1.0 mm 15 N·m (1.5 kgf·m, 11 lbf·ft)    (1)(2)(3)(4)(8)(9)(10)(5)(6)(7)

5.	Adjust the valve clearance.

6.	Install the cylinder head cover.