| 1. | Remove the ECM/PCM. |
| 2. | Remove the under-hood fuse/relay box. |
| 3. | Remove the fuses (A).
|
| 4. | Using two flat-tip screwdrivers, release the tabs (A), and pry up the fuse/relay box base (B) from the fuse/relay box housing (C). NOTE: Make sure the terminals (D) are not bent or damaged.
|
| 5. | Turn the housing over, then remove the screw (A).
|
| 6. | Turn the housing over again, then remove the ELD (A).
|
| 7. | Install the ELD in the reverse order of removal. |