| 1. | Lightly coat the reverse idler gear shaft (A), needle bearing (B), and new O-rings (C) with lithium grease.
|
| 2. | Assemble the new O-rings and needle bearing on the reverse idler gear shaft, then install the reverse idler gear shaft in the reverse idler gear shaft holder (E). Align the D-shaped cut out of the shaft with the D-shaped area of the holder. |
| 3. | Install the reverse idler gear in the transmission housing in the direction shown.
|
| 4. | Install the reverse idler gear shaft/holder assembly in the reverse idler gear.
|
| 5. | Secure the holder with the bolts. |