| 1. | Lift the vehicle up on a hoist, or apply the parking brake, block the rear wheels, and raise the front of the vehicle. Make sure it is securely supported. |
| 2. | Remove the splash shield. |
| 3. | Disconnect the 3rd clutch transmission fluid pressure switch connector, then remove the 3rd clutch transmission fluid pressure switch (A).
|
| 4. | Make sure there is no water, oil, dust, or foreign particles inside the connector. |
| 5. | Install the new 3rd clutch transmission fluid pressure switch with a new sealing washer (B), and tighten the metal part of the switch. |
| 6. | Connect the connector securely. |
| 7. | Install the splash shield. |