| 1. | Remove the air cleaner housing and air intake duct. |
| 2. | Remove the mounting bolts securing the harness cover (A), and remove the harness clamp (B).
|
| 3. | Disconnect A/T clutch pressure control solenoid valve A connector. |
| 4. | Remove the mounting bolts and the A/T clutch pressure control solenoid valve A.
|
| 5. | Remove the ATF pipe (B), ATF joint pipes (C), O-rings (D), and gasket (E). |
| 6. | Check the fluid passage of the A/T clutch pressure control solenoid valve for dust or dirt, and clean the passage. |
| 7. | Install the new gasket on the transmission housing, and install the ATF pipe and ATF joint pipes. |
| 8. | Install the new O-rings over the ATF joint pipes. |
| 9. | Install the A/T clutch pressure control solenoid valve A. |
| 10. | Check the A/T clutch pressure control solenoid valve A connector for rust, dirt, or oil, then connect the connector securely. |
| 11. | Secure the harness cover with the mounting bolts, and install the harness clamp. |
| 12. | Install the air intake duct and air cleaner housing. |