| 1. | Remove the air cleaner housing and air intake duct. |
| 2. | Remove the harness clamp (A) from its bracket, and remove the air cleaner housing bracket (B).
|
| 3. | Disconnect input shaft (mainshaft) speed sensor connector.
|
| 4. | Install the new O-ring (A) on the new input shaft (mainshaft) speed sensor (B), then install the input shaft (mainshaft) speed sensor in the transmission housing. |
| 5. | Check the connector for rust, dirt, or oil, then connect the connector securely. |
| 6. | Install the air cleaner housing bracket, and install the harness clamp on its bracket. |
| 7. | Install the air intake duct and air cleaner housing. |