| 1. | Remove the snap ring (A), cotter retainer (B), and cotters (C) from the idler gear shaft (D), then remove the idler gear shaft. Do not distort the snap ring.
|
| 2. | Check the snap ring and cotter retainer for wear and damage. Replace the snap ring and/or cotter retainer if the snap ring or cotter retainer is worn, distorted, or damaged. |
| 3. | Install the idler gear shaft in the idler gear shaft bearing. |
| 4. | Install the cotters and cotter retainer, and secure the idler gear shaft with the snap ring. |