A/T Servo Body Disassembly, Inspection, and Reassembly

1.	Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all passages.

2.	Inspect the servo body for scoring and damage.

3.	Check all valves for free movement. If any fail to slide freely, refer to valve body repair.

4.

Coat all parts with ATF during assembly.   VALVE SPRINGS SPECIFICATIONS Valve Springs  Standard (New)-Unit: mm (in.)  Wire Diameter  O.D.  Free Length  No. of Coils  A  Cut A valve spring  0.9 (0.035)  9.9 (0.390)  22.3 (0.878)  6.9  B  Shift valve B spring  0.8 (0.031)  7.1 (0.280)  23.7 (0.933)  9.7  C  5th accumulator spring A  2.5 (0.098)  16.6 (0.654)  46.9 (1.846)  7.8  D  5th accumulator spring B  1.9 (0.075)  10.0 (0.394)  38.5 (1.516)  10.6  E  2nd accumulator spring A  1.8 (0.071)  14.6 (0.575)  43.8 (1.724)  7.9  F  2nd accumulator spring B  1.85 (0.073)  9.4 (0.370)  32.5 (1.280)  8.7  G  3rd accumulator spring A  1.8 (0.071)  14.6 (0.575)  43.8 (1.724)  7.9  H  3rd accumulator spring B  1.85 (0.073)  9.4 (0.370)  32.5 (1.280)  8.7