| DTC P0767: | Shift Solenoid Valve D Stuck ON |
| 1. | Warm up the engine to normal operating temperature (the radiator fan comes on). |
| 2. | Make sure that the transmission is filled to the proper level, and check for fluid leaks. |
| 3. | Drain the ATF through a strainer. Inspect the strainer for metal debris or excessive clutch material. Does the strainer have metal debris or excessive clutch material? YES - Replace the transmission.n NO - Replace the ATF, then go to 4. |
| 4. | Clear the DTC with the HDS. |
| 5. | Test-drive the vehicle in the D position through all five gears at speeds over 20 km/h (12 mph) for more than 20 seconds, then slow down to a stop. Shift to the R position, and drive the vehicle in the R position. |
| 6. | Repeat test-driving 5. |
| 7. | Monitor the OBD status for P0767 in the DTCs/Freeze Data in A/T Mode Menu for a pass/fail. Does the result indicate FAILED? YES - Go to 8. NO - Intermittent failure, the system is OK at this time. If the tester indicates NOT COMPLETED, return to 5 and recheck.n |
| 8. | Clear the DTC with the HDS. |
| 9. | Choose Shift Solenoid D in Miscellaneous Test Menu, and check that the shift solenoid valve D operates with the HDS. Is a clicking sound heard? YES - Go to 10. NO - Replace shift solenoid valve D, then go to 13. |
| 10. | Test-drive the vehicle in the D position through all five gears at speeds over 20 km/h (12 mph) for more than 20 seconds, then slow down to a stop. Shift to the R position, and drive the vehicle in the R position. |
| 11. | Repeat test-driving 10. |
| 12. | Monitor the OBD status for P0767 in the DTCs/Freeze Data in A/T Mode Menu for a pass/fail. Does the result indicate FAILED? YES - Repair shift valve D, or replace the transmission, then go to 13. NO - Intermittent failure, the system is OK at this time. If the tester indicates NOT COMPLETED, return to 10 and recheck.n |
| 13. | Clear the DTC with the HDS. |
| 14. | Test-drive the vehicle in the D position through all five gears at speeds over 20 km/h (12 mph) for more than 20 seconds, then slow down to a stop. Shift to the R position, and drive the vehicle in the R position. |
| 15. | Repeat test-driving 14. |
| 16. | Monitor the OBD status for P0767 in the DTCs/Freeze Data in A/T Mode Menu for a pass/fail. Does the result indicate PASSED? YES - Troubleshooting is complete.n NO - Return to 8 and recheck. |