| 1. | Drain the engine coolant. |
| 2. | Remove the air cleaner housing. |
| 3. | Remove the harness holder (A) from the bracket, then remove the harness holder bracket (B).
|
| 4. | Remove the upper radiator hose (A), heater hose (B), and water bypass hose (C).
|
| 5. | Remove the air cleaner housing brackets.
|
| 6. | Remove the EGR passage.
|
| 7. | Remove the EGR valve.
|
| 1. | Install the EGR valve (A), with a new gasket (B).
|
| 2. | Install the EGR passage (A) with a new gasket (B).
|
| 3. | Install the air cleaner housing brackets.
|
| 4. | Install the upper radiator hose (A), heater hose (B), and water bypass hose (C).
|
| 5. | Install the harness holder bracket (A), then install the harness holder (B).
|
| 6. | Install the air cleaner housing. |
| 7. | Refill the radiator with engine coolant, and bleed the air from the cooling system with the heater valve open. |