| 1. | Loosen the upper torque rod mounting bolt (A).
|
| 2. | Raise the hoist to full height. |
| 3. | Remove the splash shield. |
| 4. | Loosen the front mount mounting bolt (A) (M/T).
|
| 5. | Remove the lower torque rod (A). M/T A/T |
| 6. | Install the lower torque rod, then tighten the new lower torque rod mounting bolts in the numbered sequence shown. |
| 7. | Lower the vehicle on the hoist. |
| 8. | Tighten the upper torque rod mounting bolt.
|
| 9. | Raise the hoist to full height, and tighten the front mount mounting bolt (M/T).
|
| 10. | Install the splash shield. |