| 1. | Remove the oil filter. |
| 2. | Remove the oil filter holder.
|
| 3. | Install the two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold one nut with a wrench, then use a second wrench to tighten the other nut.
|
| 4. | Tighten the oil filter feed pipe to the block to 49 N·m (5.0 kgf·m, 36 lbf·ft), then remove the nuts from the oil filter feed pipe. |
| 5. | Install the oil filter. |