DTC Troubleshooting: P0603 (131) (K20Z: M/T)

DTC Troubleshooting: P0603 (131)

DTC P0603:  ECM/PCM Internal Control Module Keep Alive Memory (KAM) Error


NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.

1.Turn the ignition switch ON (II).

2.Clear the DTC with the HDS.

3.Check for Temporary DTCs or DTCs with the HDS.

Are any Temporary DTCs or DTCs indicated?


YES - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.n


NO - Intermittent failure, system is OK at this time.n