| 1. | Inspect the thrust needle bearing and the needle bearing for galling and rough movement.
|
| 2. | Inspect the splines for excessive wear and damage. |
| 3. | Check shaft bearing surface for scoring and excessive wear. |
| 4. | Lubricate all parts with ATF during assembly. |
| 5. | Install the conical spring washer, reverse selector, 35 x 47 x 7.8 mm collar, and all gears in the direction shown. |
| 6. | Replace the locknut and conical spring washer with new ones when assembling the transmission. The countershaft locknut has left-hand threads. |
| 7. | Some reverse selector hubs, and the 3rd gear are press-fitted to the countershaft; special tools are needed to remove them and to install them. |