A/T Clutch Assembly Inspection

1.	Inspect the clutch pistons and clutch piston check valves (A).

2.	If the clutch piston check valve is loose or damaged, replace the clutch piston.

3.	Check the spring retainer for wear and damage.

4.	If the spring retainer is worn or damaged, replace it.

5.

Inspect the clutch discs, clutch plates, and clutch end plate for wear, damage, and discoloration. Clutch Discs  Standard Thickness:  1.94 mm (0.076 in.)  Clutch Plates  Standard Thickness  1st clutch  (waved-plates):  2.0 mm (0.079 in.)  2nd clutch  Waved-plates:  2.0 mm (0.079 in.)    Flat-plate:  2.0 mm (0.079 in.)  3rd clutch  Waved-plates:  2.0 mm (0.079 in.)    Flat-plate:  2.0 mm (0.079 in.)  4th clutch  (waved-plates):  2.3 mm (0.091 in.)  5th clutch  (waved-plates):  2.3 mm (0.091 in.)

6.	If the clutch discs are worn or damaged, replace them as a set. If the clutch discs are replaced, inspect the clutch end-plate-to-top-disc clearance.

7.	If any plate is worn, damaged, or discolored, replace the damaged plate with a new plate, and inspect the other waved-plates for a phase difference. If the clutch plate is replaced, inspect the clutch end-plate-to-top-disc clearance.

8.	If the clutch end plate is worn, damaged, or discolored, inspect the clutch end-plate-to-top-disc clearance, then replace the clutch end plate.