A/T Differential Carrier, Final Driven Gear Replacement (K20Z: A/T)

A/T Differential Carrier, Final Driven Gear Replacement

NOTE: Inspect and adjust the carrier bearing preload whenever the differential carrier is replaced.

1. Remove the final driven gear (A) from the differential carrier (B). The final driven gear bolts have left-hand threads.

2. Install the final driven gear on the differential carrier in the direction shown. Tighten the bolts to 103 N·m (10.5 kgf·m, 75.9 lbf·ft) in a crisscross pattern in two or more steps.