A/T Interlock System - Shift Lock Stop, Shift Lock Stop Cushion Replacement

NOTE: The illustration shows the LHD model; RHD model is similar.

1.Remove the shift lever assembly.

2.Release the shift lock solenoid lock (A), then remove the shift lock solenoid (B).

 

3.Remove the shift lock release (A) and release spring (B).

 

4.Remove the shift lock stop (C) and stop cushion (D), and replace the shift lock stop or stop cushion.

5.Install the shift lock stop cushion on the shift lock stop.

6.Apply silicone grease to the pin on the shift lever bracket base, and install the shift lock stop over the pin.

7.Install the shift lock release spring and shift lock release, apply silicone grease to shift lock release mounting tip if necessary.

8.Apply silicone grease to the tip of the shift lock stop, and install the shift lock solenoid assembly by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop.

9.Route the shift lock solenoid harness in the guide.

10.Install the shift lever assembly.