Trunk Lid Opener/Fuel Fill Door Opener Replacement

• When prying components, use the handy remover set or equivalent.
  
• LHD is shown; RHD is symmetrical.
  

1.	Using a trim tool, detach the hooks (A) by prying the front side cap (B), then remove it from the front door sill trim (C).

2.	Remove the screw.

3.	Remove the front door sill trim.

4.	Loosen the bolt (A), and remove the bolt (B), then remove the trunk lid opener/fuel fill door opener (C).

5.	Disconnect the trunk lid opener/fuel fill door opener cable (A), then remove the opener (B). Take care not to kink the cable.

6.

Install the opener in the reverse order of removal, and note these items: Make sure the opener cable is connected properly. Make sure the trunk lid and fuel fill door open properly and lock securely. Fix at the original position in the outer end of cable on the trunk lid opener/fuel fill door opener securely. And check the trunk lid latch operation: Make sure trunk lid latch and fuel fill door latch unlock when pulling and pushing the trunk lid opener/fuel fill door opener. If necessary, adjust the position of the cable end.