Carefully release the pawls, note the hooks (K) may break when upper column cover is pulled up too hard.
| 1. | Relase the tilt/telescopic lock lever (A), and adjust the steering column to full tilt down position and to the full telescopic pull position.
|
| 2. | Insert a suitable sized screwdriver or equivalent tool (B) along the guide rib (C) into the lever hole (D) in the lower column cover (E). |
| 3. | Release the hook (F) locating on the left side of the upper column cover (G). A right side hook (H) of the upper column cover can't be released from the inside. |
| 4. | Turn the steering wheel to left, and release the left pawl (I) of the upper column cover while pushing the lower column cover from the front side. |
| 5. | Turn the steering wheel to right, and release the right pawl (J) of the upper column cover is in the same as the 4. |
| 6. | Remove the cover by lightly pulling it up by releasing the right side hook (H) of the upper column cover.
|
| 7. | Remove the three screws, then remove the lower column cover (A).
|
| 8. | Install the upper and lower column cover in the reverse order of removal, and push the hooks into place securely. |