| 1. | Remove the driver's dashboard lower cover. |
| 2. | Tilt the steering column down, and telescope it out. |
| 3. | Remove the screw.
|
| 4. | Pull the back of the switch panel (A) by hand from the driver's lower cover opening to release the clips (B) and hook (C) on the outside.
|
| 5. | Pry up on the inside edge of the subdisplay visor (D) with a trim tool to detach the clip (E), and release the pin (F). |
| 6. | Detach the clips along the upper edge of the subdisplay visor (A). Gently pull out the visor to release the hooks (B).
|
| 7. | Disconnect the illumination control switch connector (A). If equipped, disconnect the headlight adjuster switch connector (B) and VSA off switch connector (C).
|
| 8. | If necessary, remove the screws, then remove the illumination control switch (A) and switch panel (B) from the subdisplay visor (C).
|
| 9. | Install the subdisplay visor in the reverse order of removal, and note these items:
|