Interior Trim Removal/Installation - Front Pillar Trim

Interior Trim Removal/Installation - Front Pillar Trim - Without Side Curtain Airbags

Front Pillar Trim

NOTE:

Put on gloves to protect your hands.
Take care not to bend or scratch the trim and panels.
When removing components, use the handy remover set or equivalent.

1. Pull out the door opening seal (A) as needed. Pull the upper portion of the front pillar trim (B) back by hand to detach the clips, and pull the trim up, then remove it from the dashboard (C).

2. Install the trim in the reverse order of removal, and note these items:

Check for damaged or stress-whitened clips, and replace them with new ones.
Push the clips into place securely.