Rear Seat Removal/Installation

Seat-back - Fold Down

1.	Remove the seat-back (A). -1  Fold the seat-back forward. -2  Pull the rear center seat belt (B) out through the slit (C) in the seat belt guide (D). -3  Release the fasteners (E), and pull back the seat-back cover (F), then remove the bolts. -4  Release the hooks (G) of the pivot brackets (H).

2.	Remove the bolt, then remove the pivot bracket (A).

3.	Install the seat-back in the reverse order of removal, and note these items: Guide the belt over the front of the seat-back as you install the seat-back. Before attaching the rear seat-back, make sure there are no twists or kinks in the rear center seat belt.

Seat-back - Split Fold Down

1.	Remove the right seat-back (A). -1  Fold the right seat-back forward. -2  Release the fasteners (B), and pull back the seat-back cover (C), then remove the bolts. -3  Release the hooks (D) of the pivot bracket (E).

2.	Remove the bolt, then remove the center pivot bracket (A).

3.	If necessary, remove the bushing (B).

4.

Remove the left seat-back (A). -1  Fold the left seat-back forward. -2  Pull the rear center seat belt (B) out through the slit (C) in the seat belt guide (D). -3  Release the fastener (E), and pull back the seat-back cover (F), then remove the bolt. -4  Release the hooks (G) of the pivot bracket (H).

5.	Extend the rear center seat belt (A) to remove the left seat-back (B), then release the pivot shaft (C) from the center pivot bracket (D).

6.	If necessary, remove the bushing (A), from the center pivot bracket (B).

7.	Remove the bolt, then remove the pivot bracket (A).

8.	Install the seat-back in the reverse order of removal, and note these items: Guide the belt over the front of the seat-back as you install the seat-back. Before attaching the rear seat-back, make sure there are no twists or kinks in the rear center seat belt.

Seat Cushion - Fold Down/Split Fold Down

1.	Remove the bolt from between the seat-back (A) and the seat cushion (B).

2.	Pull the seat hook knobs (A) while pushing down on the seat cushion (B), to release the hooks (C).

3.	Pull back the seat cushion to release the center seat belt (D) and seat belt buckles (E) from their slits (F), and remove it.

4.	Install the seat cushion in the reverse order of removal, and note these items: Before attaching the seat cushion, make sure there are no twists or kinks in the seat belts. When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.

Seat Side Bolster - Fold Down/Split Fold Down

1.	Remove the seat cushion.

2.	Remove the bolt.

3.	Fold the seat-back forward.

4.	Lift the seat side bolster (A) up to release the hook (B), then remove the seat side bolster.

5.	Install the side bolster in the reverse order of removal, and note these items: Guide the belts over the front of the seat side bolster as you install the bolster. Before attaching the seat side bolster, make sure there are no twists or kinks in the seat belts.

Seat-back/Seat Cushion - Fixed

1.	Remove the bolt from between the seat-back (A) and the seat cushion (B).

2.	Pull the seat hook knobs (A) while pushing down on the seat cushion (B), to release the hooks (C).

3.	Pull back the seat cushion to release the center seat belt (D) and seat belt buckles (E) from their slits (F), and remove it.

4.	Remove all of the headrests.

5.	Release the center seat belt (A) from the guide (B).

6.	Remove the bolts (A, B) securing the seat-back (C).

7.	Lift the seat-back (A) up to release the wire loops with collars (B) from the hooks (C) on the body, then remove the seat-back.

8.

Install the seat in the reverse order of removal, and note these items: Guide the belts over the front of the seat-back as you install the seat-back. Before attaching the rear seat-back and cushion, make sure there are no twists or kinks in the seat belts. When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.