Windshield Wiper Arm/Nozzle Adjustment

Wiper arms stop position

1.	When the wiper arms stop at automatic stop position, confirm the wiper arms are at the standard position. a:  Position at about 29 mm (1.1 in.) from the top of cowl cover (A)  b:  Position at about 106 mm (4.1 in.) from the top of cowl cover (A)

Washer nozzle position

2.

When you jet the washer fluid, confirm 50 % or more of the jet fluid splashes down within the slash area. If there are not standard positions, adjust the nozzles. c:  Position at about 302 mm (11.8 in.) from the top of black ceramic (B) at lower windshield  d:  Position at about 302 mm (11.8 in.) from the top of black ceramic (B) at lower windshield  e:  Position at about 250 mm (9.8 in.) from the windshield center line (C)