A/C Refrigerant Oil Replacement (With A/C)

A/C Refrigerant Oil Replacement

Recommended PAG oil: SANDEN SP-10

P/N 38897-P13-003: 120 mL (4 fl·oz, 4.2 Imp·oz)
P/N 38898-P13-003: 250 mL (8 1/3 fl·oz, 8.8 Imp·oz)
P/N 38899-P13-A01: 40 mL (1 1/3 fl·oz, 1.4 Imp·oz)

Add the recommended refrigerant oil in the amount listed if you replace any of the following parts.

To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if it gets on the paint, wash it off immediately.

A/C condenser . 50 mL (1 2/3 fl·oz, 1.8 Imp·oz)
Evaporator . 40 mL (1 1/3 fl·oz, 1.4 Imp·oz)
Line or hose . 10 mL (1/3 fl·oz, 0.4 Imp·oz)
Receiver/Dryer . 10 mL (1/3 fl·oz, 0.4 Imp·oz)
Leakage repair . 25 mL (5/6 fl·oz, 0.9 Imp·oz)
A/C compressor . Since the oil separator is equipped inside the compressor for this vehicle, oil drainage is unnecessary at the time of compressor replacement.

A/C condenser .	50 mL (1 2/3 fl·oz, 1.8 Imp·oz)
Evaporator .	40 mL (1 1/3 fl·oz, 1.4 Imp·oz)
Line or hose .	10 mL (1/3 fl·oz, 0.4 Imp·oz)
Receiver/Dryer .	10 mL (1/3 fl·oz, 0.4 Imp·oz)
Leakage repair .	25 mL (5/6 fl·oz, 0.9 Imp·oz)
A/C compressor .	Since the oil separator is equipped inside the compressor for this vehicle, oil drainage is unnecessary at the time of compressor replacement.