| DTC indicator 5: | A Problem in the Mode Control Linkage, Doors, or Motor |
| 1. | Clear the DTC. |
| 2. | Turn the ignition switch OFF, and then ON (II). |
| 3. | Do the self-diagnostic with the HVAC control unit. |
| 4. | Check for DTCs. Is DTC 5 indicated? YES - Go to 5. NO - Intermittent failure.n |
| 5. | Turn the ignition switch OFF. |
| 6. | Test the mode control motor. Is the mode control motor OK? YES - Substitute a known-good HVAC control unit, and recheck. If the symptom/indication goes away, replace the original HVAC control unit.n NO - Replace the mode control motor, or repair the mode control linkage or doors.n |