Cam Chain Auto-tensioner Removal and Installation

Removal


1.Remove the chain case cover.

 

2.Turn the crankshaft counterclockwise to compress the auto-tensioner.

 

3.Align the holes on the lock (A) and the auto-tensioner (B), then insert a 1.0 mm (0.04 in.) diameter pin (C) into the holes. Turn the crankshaft clockwise to secure the pin.

 

4.Remove the auto-tensioner.

 

Installation


1.Install the auto-tensioner.

 

2.Remove the pin from the auto-tensioner.

 

3.Remove all of the old liquid gasket from the chain case cover mating surfaces, bolts, and bolt holes.

4.Clean, and dry the chain case cover mating surfaces.

5.Apply liquid gasket, P/N 08C70-K0234M, 08C70- K0334M or 08C70-X0331S, evenly to the chain case mating surface of the chain case cover.

NOTE: Do not install components if 5 minutes or more have passed after applying the liquid gasket. Instead, remove the old residue and reapply the liquid gasket.

 

6.Install the chain case cover.

NOTE:
  • Wait at least 30 minutes before filling the engine with oil.
  • Do not run the engine for at least 3 hours after installing the chain case.