Engine Oil/Air Separator Installation

1.Remove all of the old liquid gasket from the oil/air separator mating surfaces, bolts, and bolt holes.

2.Clean, and dry the oil/air separator mating surfaces.

3.Apply liquid gasket, P/N 08C70-K0234M, 08C70-
K0334M or 08C70-X0331S, evenly to the engine block mating surface of the oil/air separator.

NOTE: Do not install components if 5 minutes or more have passed after applying the liquid gasket. Instead, remove the old residue and reapply the liquid gasket.

 

4.Install the oil/air separator.

NOTE:
  • Wait at least 30 minutes before filling the engine with oil.
  • Do not run the engine for at least 3 hours after installing the oil/air separator.